GST AATO (Annual Aggregate Turnover) Calculation
The calculation of AATO is based on return filed by taxpayer.
The detailed calculation method of AATO has been elaborate in this article later.
An opportunity has been given on dashboard to modify AATO where
you believe that AATO figure is wrong and in that situation you can rectify
AATO. If the figure you have changed beyond certain limit as per Advisory by GST
below, the changed figure shall be sent to jurisdictional officer for
appropriate action, if it deemed fit.
Some taxpayer have changed the figure of AATO just for
confirmation which is not required. If AATO shown on dashboard is correct, then
not required any action.
Please Read the Advisory by
GST carefully:-
· This
facility shows to the taxpayer AATO (Annual Aggregate Turnover) based on the
returns filed by him/her in the last financial year.
· The
facility of turnover update has also been provided to the taxpayer in this
functionality, if the said taxpayer feels that the system calculated turnover
varies from the turnover as per his/her records.
· As
stated, the calculation is based on the returns filed in the last financial
year. For details of the calculation see Turnover
calculation logic.
· This
facility of turnover update shall be provided to all the GSTINs registered on a
common PAN. All the changes by any of the GSTINs in his turnover shall be
summed up for computation of Annual Aggregate Turnover for each of the GSTINs.
· The
taxpayer can amend the turnover twice within a period of one
month from the date of roll out of this functionality.
· Thereafter,
the updated value shall be frozen with no further attempts provided to the
taxpayers to amend their turnover(s) and this turnover figure will be sent to
the Jurisdictional Tax Officer for review.
· In
case the jurisdictional Officer finds any discrepancy in the updated/amended
values furnished by the taxpayer, the said officer can amend the turnover.
· Tax
officers are expected to consult and/or communicate with the taxpayer before
amending the turnover declared by the taxpayer.
· The
turnover finalized by the tax officer after such consultation shall be
considered final.
· In
case no action is taken by the officer within 30 days on the turnover reported
by the taxpayer, the same shall then be considered final (which will be
displayed to the taxpayer accordingly) and will be considered as such for the
entire previous financial year.
· In
case of any grievances pertaining to the said functionality, the aggrieved
taxpayer can raise a ticket at https://selfservice.gstsystem.in.
· All
such tickets shall be investigated by the technical team and shall be resolved
on a case by case basis and when needed they shall be forwarded to the
jurisdictional officer.
· Note: Taxpayers
are expected to use this functionality only if there is a discrepancy
observed by them in the system calculated turnover as per the calculation
logic mentioned above.
AATO(Annual Aggregate Turnover) Computation
Methodology
For Normal Taxpayers who have filed all GSTR-3Bs:
Turnover reported in GSTR-3B Column 2 of Table 3.1 [
(a),(b),(c) & (e)] during the Financial Year 2020-21 have been taken into
consideration (in case all the returns have been filed for the same).
- Outward taxable
supplies (other than zero rated, nil rated and exempted).
- Outward taxable
supplies (zero rated).
- Other
outward supplies (nil rated, exempted).
- Non-GST
outward supplies.
For Normal Taxpayers who have not filed all GSTR-3Bs:
The following formula is used for extrapolation of
turnover:
(Sum of taxable value) X (*No.of GSTR-3B liable to be
filed)/(No. of GSTR-3B filed)
*Categorization of taxpayers to derive the number of
GSTR-3B liable to be filed
I. Active GSTINs as on date and were NOT IN
composition during FY 2020-21, number of GSTR-3B liable to be filed
have been arrived at as follows:
If the taxpayer is migrated, then no. of GSTR-3B liable to
be filed is 12 (Twelve)
If the taxpayer is new and registered on or before 31st March,2021,
the no. of GSTR-3Bs liable to be filed shall be derived on the basis of GSTIN
approval/grant date i.e. if approval/grant date is on or before April, 2020,
then 12, else based on month of approval/grant of GSTIN (e.g. If the month of
grant of GSTIN is May 2020, then number of GSTR-3B liable to be filed is 11, if
it is June 2020, then it is 10 and so on).
II. GSTINs who are cancelled as on date and
were NOT IN composition during 2020-21, number of GSTR-3B liable
to be filed have been arrived at as follows:
GSTINs registered on or before 31st March 2021.
Months between cancellation date and approval/grant date of
GSTIN decides the number of GSTR-3B liable to be filed.
If cancellation date is beyond March 2021, then month
between March 2021 and approval/grant Month of GSTIN is derived.
If approval/Grant of GSTIN month is before April 2020, then
month between cancellation date and April 2020 is derived.
III. GSTINs who are active as on date
and were in composition BUT WITHDRAWN during 2020-21, number of
GSTR-3B liable to be filed have been arrived at as follows:
GSTINs registered on or before 31st March 2021.
Months between Withdrawal date and 31st March 2021 is
defined as number of GSTR-3B liable to file.
IV. GSTINs who are cancelled as on date
and were in composition BUT WITHDRAWN during 2020-21, number of
GSTR-3B liable to be filed have been arrived at as follows:
GSTINs registered on or before 31st March 2021.
Months between Withdrawal date and 31st March 2021 and
cancellation date decides the number of GSTR-3B liable to be filed.
If cancellation date is beyond March 2021, then month
between March 2021 and Withdrawal Month of GSTIN is derived.
For Composition Taxpayers opted-in throughout the
FY: Since the Annual Aggregate Turnover limit for opting in as Composition
Taxpayer is up to Rs. 1.5 crore, and will use the following extrapolation
formula:
(Sum of taxable value) X (*No. of CMP-08 liable to be
filed)/ (No. of CMP-08 filed)
Thank you.

hi
ReplyDelete